1. Check Your Laptop Boot Options
Before you start troubleshooting your laptop that won’t boot into Windows, you should check to make sure that you have the proper boot options enabled. Most laptops come with a BIOS setup program that can be accessed by pressing a special combination of keys when you first turn on the laptop. This will allow you to access the BIOS setup program, which should allow you to configure your laptop’s boot priority. Most laptops will have an option for booting from either an optical drive, USB device, or hard drive. Depending on the laptop model, the exact procedure for accessing your laptop’s BIOS setup program may vary, so if you are unsure, it would be best to consult your laptop’s manual.
2. Run a System Restore
If your laptop is still not booting into Windows, you can try to run a system restore using a recovery disc or USB drive. Almost all modern laptops come with a recovery partition built-in, and some even include a recovery disc. This can be used to restore the system to its factory settings. If your laptop does not have a recovery disc or partition, you can create a bootable recovery USB drive. You will need to download an ISO image file from the official website of the laptop manufacturer, and use the USB drive to boot from the ISO image. Once booted, the recovery process will usually be straightforward.
3. Check the Hard Drive
If running a system restore does not solve the issue, you should check your laptop’s hard drive for any errors. The easiest way to do this is by using Windows’ built-in chkdsk utility. To launch chkdsk, you will need to open a command prompt window (you can do this by pressing the “Windows” + “R” keys) then typing “cmd” and hitting enter. In the command prompt window, type “chkdsk /f” then press enter. This will launch chkdsk, which will scan your hard drive and attempt to fix any errors that it finds. This process can take up to an hour or more to complete, so please be patient.
4. Scan for Malware
If chkdsk was unable to fix all of the errors on your hard drive, you should then try to scan for malware. When your laptop won’t start up, it could be caused by a virus or other malicious software. To scan for malware, you should download and install an antivirus program such as Avast or AVG, and then perform a full system scan. This will look for any suspicious files and programs that could be causing your laptop to not boot. Make sure to quarantine any malware that is found and then restart your system.
5. Replace the Hard Drive
If none of the above methods work, then you may need to replace the hard drive. If the hard drive has become corrupted or is otherwise damaged, then it will likely need to be replaced before your laptop can boot into Windows again. Replacing a laptop’s hard drive is not a difficult task, but it is important to remember that it will erase any data stored on the drive. If your laptop has a removable hard drive, you should be able to purchase a new one and install it yourself. However, if your laptop uses an integrated hard drive, then you may need to take it to a technician.
Finally, if your laptop still won’t start up, then it may have a hardware issue that needs to be addressed. In this case, you should take your laptop to a technician who can diagnose and repair the problem. With a bit of luck, this article has given you enough information to get your laptop up and running again.