1. Connecting to a Network
First, you’ll need to obtain an Ethernet cable and plug one end into your computer’s network port, if you have one. If not, then the other end must be connected to your router. You may also need a USB Wireless Adapter, if your computer is not already equipped with built-in wifi.
2. Choosing a Network Type
You will need to choose whether you are connecting to a home network or a public network. You can typically do this by clicking on the network icon on your computer. All devices that are connected to the same network should be configured in the same way.
3. Choosing Your Network Protocol
You may need to use a specific protocol for your network connection. If you’re using a home network, it’s likely that most of your devices will already be configured to use DHCP. For public networks, you may need to manually configure each device to use either PPPoE or Static IP settings.
4. Configuring Your Network
If you’re using a home network, you may need to configure your settings in your router. This can be done through the administrative settings of your router.
Depending on which protocol you’ve chosen, you may also need to configure your settings on each device separately. For DHCP, you just need to allow your device to auto-configure. For PPPoE or Static IP settings, you will need to enter information such as the server address, IP address, subnet mask and default gateway.
5. Troubleshooting Your Connection
If you’re having trouble connecting to your network, try rebooting your router and resetting your network settings. If that doesn’t work, then you may need to check that all of your networking hardware is connected correctly. You should also check that your settings are correct and that you’ve entered them correctly on each device.